[1970-Jan-01 00:01:34.950637]: Loading settings from string... [1970-Jan-01 00:01:35.257833]: Parsing toolhead settings for bronx... [1970-Jan-01 00:01:35.259862]: Parsing toolhead settings for chamber... [1970-Jan-01 00:01:35.319665]: Rebuilding toolhead structure [1970-Jan-01 00:01:35.359396]: Building bronx location 0... [1970-Jan-01 00:01:35.518371]: Building chamber location 1... [1970-Jan-01 00:01:35.592850]: Initialization: heater settings [1970-Jan-01 00:01:35.594701]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C [1970-Jan-01 00:01:35.596865]: Initialization: heater settings [1970-Jan-01 00:01:35.598727]: storing heater 1 to time out after 120 minutes at temp, 20 minutes with no rise of 40C, fan feedforward amount 15C [1970-Jan-01 00:01:35.630781]: Settings: Parsing home subtree... [1970-Jan-01 00:01:35.656566]: Init endstop for axis: 0, type: load_sense, polarity: false [1970-Jan-01 00:01:35.672865]: Init endstop for axis: 1, type: load_sense, polarity: false [1970-Jan-01 00:01:35.674662]: Init endstop for axis: 2, type: toolhead, polarity: false [1970-Jan-01 00:01:35.716920]: Parsing root settings... [1970-Jan-01 00:01:35.791053]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732 [1970-Jan-01 00:01:35.822127]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732 [1970-Jan-01 00:01:35.823952]: STEPPER CONVERSIONS: Axis 2 steps per mm: -2666.67 [1970-Jan-01 00:01:35.825758]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55 [1970-Jan-01 00:01:35.827690]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 4 30 0 [1970-Jan-01 00:01:35.829931]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 30 0 [1970-Jan-01 00:01:35.842398]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0 [1970-Jan-01 00:01:35.844568]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31 [1970-Jan-01 00:01:35.846973]: syncing set to true [1970-Jan-01 00:01:35.889283]: Axis count unspecified, defaulting to 4 [1970-Jan-01 00:01:35.945563]: Loading capacitor model settings for extruder 0 [1970-Jan-01 00:01:35.948994]: Have 15 valid ToolheadManager pointers, 0 is 0x1df640 [1970-Jan-01 00:01:36.070798]: setting driver address to 22 [1970-Jan-01 00:01:36.152638]: sending moose chamber brightness 255 [1970-Jan-01 00:01:39.348159]: Init step: 0 [1970-Jan-01 00:01:39.412133]: Reset Toolhead Program State [1970-Jan-01 00:01:39.413912]: Toolhead programmer: Resetting [1970-Jan-01 00:01:39.444676]: Reset Toolhead Program State [1970-Jan-01 00:01:39.446480]: Toolhead programmer: Resetting [1970-Jan-01 00:01:39.448119]: done [1970-Jan-01 00:01:40.661263]: Init step: 1 [1970-Jan-01 00:01:40.668201]: done [1970-Jan-01 00:01:41.163582]: Init step: 2 [1970-Jan-01 00:01:41.165300]: done [1970-Jan-01 00:01:41.666162]: Init step: 3 [1970-Jan-01 00:01:41.807468]: done [1970-Jan-01 00:01:42.167592]: Init step: 4 [1970-Jan-01 00:01:42.187701]: done [1970-Jan-01 00:01:42.669437]: Init step: 5 [1970-Jan-01 00:01:42.686587]: done [1970-Jan-01 00:01:43.172773]: Init step: 5 [1970-Jan-01 00:01:43.375064]: done [1970-Jan-01 00:01:43.674640]: Init step: 5 [1970-Jan-01 00:01:43.762514]: done [1970-Jan-01 00:01:44.176481]: Init step: 5 [1970-Jan-01 00:01:44.178271]: done [1970-Jan-01 00:01:44.687957]: Init step: 5 [1970-Jan-01 00:01:44.700776]: done [1970-Jan-01 00:01:45.193674]: Init step: 5 [1970-Jan-01 00:01:45.395967]: done [1970-Jan-01 00:01:45.695736]: Init step: 5 [1970-Jan-01 00:01:45.710911]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b Packet CRC: 0x0 [1970-Jan-01 00:01:45.712775]: Toolhead 0 : Toolhead Response Fail with comm_error: 1 Retry # : 1 [1970-Jan-01 00:01:45.715588]: Got valid API version 6 for Toolhead 1 [1970-Jan-01 00:01:45.726279]: done [1970-Jan-01 00:01:46.197643]: Init step: 5 [1970-Jan-01 00:01:46.210452]: done [1970-Jan-01 00:01:46.699472]: Init step: 5 [1970-Jan-01 00:01:46.806646]: done [1970-Jan-01 00:01:47.212382]: Init step: 5 [1970-Jan-01 00:01:47.315709]: Toolhead 1: Toolhead has Firmware version 0.43,734 [1970-Jan-01 00:01:47.317694]: Toolhead 1 initialized [1970-Jan-01 00:01:47.319442]: done [1970-Jan-01 00:01:47.714699]: Init step: 5 [1970-Jan-01 00:01:47.730896]: Got valid API version 6 for Toolhead 0 [1970-Jan-01 00:01:47.732679]: Toolhead 1 initialized [1970-Jan-01 00:01:47.734463]: done [1970-Jan-01 00:01:48.215857]: Init step: 5 [1970-Jan-01 00:01:48.230917]: Toolhead 1 initialized [1970-Jan-01 00:01:48.232650]: done [1970-Jan-01 00:01:48.718039]: Init step: 5 [1970-Jan-01 00:01:48.821049]: Toolhead 1 initialized [1970-Jan-01 00:01:48.822772]: done [1970-Jan-01 00:01:49.226611]: Init step: 5 [1970-Jan-01 00:01:49.229564]: Toolhead 0: Toolhead has Firmware version 1.7,734 [1970-Jan-01 00:01:49.231781]: Toolhead 0 initialized [1970-Jan-01 00:01:49.240976]: Toolhead 1 initialized [1970-Jan-01 00:01:49.242660]: done [1970-Jan-01 00:01:49.722985]: Init step: 6 [1970-Jan-01 00:01:49.724847]: done [1970-Jan-01 00:01:50.224901]: Init step: 7 [1970-Jan-01 00:01:50.227274]: done [1970-Jan-01 00:01:50.744757]: bronx lowest mem space: 0x376 bytes [1970-Jan-01 00:01:50.746438]: Checking tool eeprom version [1970-Jan-01 00:01:50.748170]: Commanding tool usage stat retrieve [1970-Jan-01 00:01:50.749811]: New tool uid 0x1bdb6 attached, updating info cache [1970-Jan-01 00:01:50.764451]: Connected tool has eepromv4 [1970-Jan-01 00:01:50.771718]: Raw usage stats: retract 3759621706ct, extrusion 192128523 steps, 1024658 seconds, refurbed 0 times [1970-Jan-01 00:01:50.773637]: Steps/mm not configured, tool usage logging will be wrong! [1970-Jan-01 00:01:50.795540]: PRU Event: PRU_INIT [1970-Jan-01 00:01:50.941287]: GetCachedToolUsageStats called [1970-Jan-01 00:02:15.539944]: GetCachedToolUsageStats called [1970-Jan-01 00:02:46.922627]: bronx lowest mem space: 0x372 bytes [1970-Jan-01 02:40:34.129917]: bronx lowest mem space: 0x36e bytes [1970-Jan-01 16:18:39.374725]: bronx lowest mem space: 0x36a bytes [1970-Jan-01 20:24:03.270441]: TH0: 2 failures in last 65536 packets (0.00305176%) [1970-Jan-01 21:07:22.299186]: TH1: 1 failures in last 65536 packets (0.00152588%) [1970-Jan-03 18:12:02.082797]: bronx lowest mem space: 0x366 bytes [1970-Jan-06 03:32:57.097861]: GetCachedToolUsageStats called [1970-Jan-06 03:33:00.352118]: GetCachedToolUsageStats called [1970-Jan-12 09:15:17.472781]: Expected packet id: 0xd2, Got packet id: 0x11, Full packet: 0xf3,0x1,0x0,0x24,0x0,0x17,0x0,0x0,0x0,0x0,0x17,0x0,0x0,0x0,0xaa,0x2,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x11,0x13,0x5a,0x44,0x9e, [1970-Jan-12 09:15:17.474830]: Toolhead 1 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jan-12 11:31:34.762024]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Jan-13 14:15:14.039536]: bronx lowest mem space: 0x362 bytes [1970-Jan-15 16:09:25.164898]: Toolhead 1: CRC error on Bronx [1970-Jan-15 16:09:25.166772]: Toolhead 1 : Toolhead Response Fail with comm_error: 1 Retry # : 1 [1970-Jan-16 00:38:39.461476]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Feb-06 18:30:52.859912]: bronx lowest mem space: 0x35e bytes [1970-Mar-21 08:59:38.109440]: GetCachedToolUsageStats called [1970-Mar-21 09:03:58.572081]: GetCachedToolUsageStats called [1970-Mar-21 09:04:01.935124]: GetCachedToolUsageStats called [1970-Mar-21 09:06:42.614631]: GetCachedToolUsageStats called [1970-Mar-21 09:06:46.743924]: GetCachedToolUsageStats called [1970-Mar-21 16:26:22.552734]: Toolhead 1: CRC error on Bronx [1970-Mar-21 16:26:22.554658]: Toolhead 1 : Toolhead Response Fail with comm_error: 1 Retry # : 1 [1970-Mar-21 22:28:11.580297]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Mar-22 17:48:28.551535]: GetCachedToolUsageStats called [1970-Mar-22 17:49:30.933357]: GetCachedToolUsageStats called [1970-Mar-22 17:49:54.308587]: GetCachedToolUsageStats called [1970-Mar-22 17:55:48.442410]: GetCachedToolUsageStats called [1970-Mar-22 17:55:53.276213]: GetCachedToolUsageStats called [1970-Mar-22 17:55:59.374820]: GetCachedToolUsageStats called [1970-Mar-22 17:56:09.600273]: GetCachedToolUsageStats called [1970-Mar-22 17:56:12.740524]: GetCachedToolUsageStats called [1970-Mar-22 17:56:16.547507]: GetCachedToolUsageStats called [1970-Mar-22 17:59:08.393862]: GetCachedToolUsageStats called [1970-Mar-22 18:00:19.401147]: GetCachedToolUsageStats called [1970-Mar-22 18:00:24.640416]: GetCachedToolUsageStats called [1970-Mar-22 18:00:32.405760]: GetCachedToolUsageStats called [1970-Mar-22 18:00:43.179802]: GetCachedToolUsageStats called [1970-Mar-22 18:00:45.815518]: GetCachedToolUsageStats called [1970-Mar-22 18:01:01.080839]: GetCachedToolUsageStats called [1970-Mar-22 18:01:42.374691]: GetCachedToolUsageStats called [1970-Mar-22 18:01:49.238189]: GetCachedToolUsageStats called [1970-Mar-22 18:05:21.249821]: GetCachedToolUsageStats called [1970-Mar-22 18:05:26.265871]: GetCachedToolUsageStats called [1970-Mar-22 18:05:29.485332]: GetCachedToolUsageStats called [1970-Mar-22 18:05:44.018338]: GetCachedToolUsageStats called [1970-Mar-22 18:05:46.398569]: GetCachedToolUsageStats called [1970-Mar-22 18:05:47.383575]: GetCachedToolUsageStats called [1970-Mar-22 18:12:39.602972]: GetCachedToolUsageStats called [1970-Mar-22 18:12:56.126431]: GetCachedToolUsageStats called [1970-Mar-22 18:13:40.575844]: GetCachedToolUsageStats called [1970-Mar-22 18:15:08.422268]: GetCachedToolUsageStats called [1970-Mar-22 18:15:34.544962]: GetCachedToolUsageStats called [1970-Mar-22 18:15:37.415982]: GetCachedToolUsageStats called [1970-Mar-22 18:15:54.139279]: GetCachedToolUsageStats called [1970-Mar-22 18:16:12.987470]: GetCachedToolUsageStats called [1970-Mar-22 18:22:32.158274]: GetCachedToolUsageStats called [1970-Mar-22 18:22:37.145792]: GetCachedToolUsageStats called [1970-Mar-22 18:22:39.704171]: GetCachedToolUsageStats called [1970-Mar-22 18:22:54.311059]: GetCachedToolUsageStats called [1970-Mar-22 18:22:56.357718]: GetCachedToolUsageStats called [1970-Mar-22 18:23:48.578028]: GetCachedToolUsageStats called [1970-Mar-22 18:25:31.237025]: GetCachedToolUsageStats called [1970-Mar-22 18:25:45.774988]: GetCachedToolUsageStats called [1970-Mar-22 18:25:51.678231]: GetCachedToolUsageStats called [1970-Mar-22 18:26:01.579199]: GetCachedToolUsageStats called [1970-Mar-22 18:26:11.417534]: GetCachedToolUsageStats called [1970-Mar-22 18:27:38.195229]: GetCachedToolUsageStats called [1970-Mar-22 18:27:56.175969]: GetCachedToolUsageStats called [1970-Mar-22 18:29:49.762687]: GetCachedToolUsageStats called [1970-Mar-22 18:29:59.109649]: GetCachedToolUsageStats called [1970-Mar-23 05:24:56.096321]: GetCachedToolUsageStats called [1970-Mar-23 05:24:59.283251]: GetCachedToolUsageStats called [1970-Mar-24 04:49:04.562158]: GetCachedToolUsageStats called [1970-Mar-24 04:49:22.333194]: GetCachedToolUsageStats called [1970-Mar-24 04:50:35.278156]: GetCachedToolUsageStats called [1970-Mar-24 04:51:24.339718]: GetCachedToolUsageStats called [1970-Mar-24 04:52:48.596947]: GetCachedToolUsageStats called [1970-Mar-24 04:53:09.044687]: GetCachedToolUsageStats called [1970-Mar-27 01:17:10.722759]: GetCachedToolUsageStats called [1970-Mar-27 01:17:13.614667]: GetCachedToolUsageStats called [1970-Mar-28 00:11:35.351566]: GetCachedToolUsageStats called [1970-Mar-28 00:11:38.253397]: GetCachedToolUsageStats called [1970-Mar-28 19:20:03.661006]: GetCachedToolUsageStats called [1970-Mar-28 19:49:31.805685]: GetCachedToolUsageStats called [1970-Mar-28 19:49:53.750975]: GetCachedToolUsageStats called [1970-Mar-28 19:51:16.808682]: GetCachedToolUsageStats called [1970-Mar-28 19:52:16.455765]: GetCachedToolUsageStats called [1970-Mar-28 19:52:34.767592]: GetCachedToolUsageStats called [1970-Mar-28 19:52:45.008235]: GetCachedToolUsageStats called [1970-Mar-28 19:53:51.071689]: GetCachedToolUsageStats called [1970-Mar-28 19:53:56.609902]: GetCachedToolUsageStats called [1970-Mar-28 19:54:11.505906]: GetCachedToolUsageStats called [1970-Mar-28 19:54:13.908695]: GetCachedToolUsageStats called [1970-Mar-28 19:55:37.581185]: GetCachedToolUsageStats called [1970-Mar-28 19:56:44.476376]: GetCachedToolUsageStats called [1970-Mar-28 19:57:02.911172]: GetCachedToolUsageStats called [1970-Mar-28 19:57:53.605747]: GetCachedToolUsageStats called [1970-Mar-28 20:00:20.827771]: GetCachedToolUsageStats called [1970-Mar-28 20:00:37.648558]: GetCachedToolUsageStats called [1970-Mar-28 20:02:35.643030]: GetCachedToolUsageStats called [1970-Mar-28 20:02:51.896167]: GetCachedToolUsageStats called [1970-Mar-28 20:03:59.784679]: GetCachedToolUsageStats called [1970-Mar-31 20:57:23.918116]: GetCachedToolUsageStats called [1970-Mar-31 21:06:25.722793]: Toolhead 1: CRC error on Bronx [1970-Mar-31 21:06:25.725556]: Toolhead 1 : Toolhead Response Fail with comm_error: 1 Retry # : 1 [1970-Apr-01 01:50:42.751615]: GetCachedToolUsageStats called [1970-Apr-01 01:50:45.083981]: GetCachedToolUsageStats called [1970-Apr-01 12:50:38.311747]: GetCachedToolUsageStats called [1970-Apr-01 12:52:12.758204]: GetCachedToolUsageStats called [1970-Apr-01 12:52:52.732622]: GetCachedToolUsageStats called [1970-Apr-01 12:56:22.864675]: GetCachedToolUsageStats called [1970-Apr-01 13:01:13.876961]: GetCachedToolUsageStats called [1970-Apr-01 13:01:16.443294]: GetCachedToolUsageStats called [1970-Apr-01 13:01:32.537401]: GetCachedToolUsageStats called [1970-Apr-01 13:01:33.049897]: GetCachedToolUsageStats called [1970-Apr-01 13:01:38.432779]: GetCachedToolUsageStats called [1970-Apr-01 13:05:35.617708]: GetCachedToolUsageStats called [1970-Apr-01 13:06:55.798024]: GetCachedToolUsageStats called [1970-Apr-01 13:08:00.921783]: GetCachedToolUsageStats called [1970-Apr-01 13:08:17.133568]: GetCachedToolUsageStats called [1970-Apr-01 13:09:32.949593]: GetCachedToolUsageStats called [1970-Apr-01 13:10:46.051840]: GetCachedToolUsageStats called [1970-Apr-01 13:14:41.197731]: GetCachedToolUsageStats called [1970-Apr-01 13:15:00.249520]: GetCachedToolUsageStats called [1970-Apr-01 13:19:29.850478]: GetCachedToolUsageStats called [1970-Apr-01 13:19:46.630838]: GetCachedToolUsageStats called [1970-Apr-01 13:21:15.792455]: GetCachedToolUsageStats called [1970-Apr-01 13:22:29.196324]: GetCachedToolUsageStats called [1970-Apr-01 13:23:58.858268]: GetCachedToolUsageStats called [1970-Apr-01 13:29:26.404233]: GetCachedToolUsageStats called [1970-Apr-01 13:29:49.078456]: GetCachedToolUsageStats called [1970-Apr-01 13:30:28.272320]: GetCachedToolUsageStats called [1970-Apr-01 13:30:47.390431]: GetCachedToolUsageStats called [1970-Apr-01 13:33:47.005048]: GetCachedToolUsageStats called [1970-Apr-01 13:34:30.538920]: GetCachedToolUsageStats called [1970-Apr-01 13:35:00.285290]: GetCachedToolUsageStats called [1970-Apr-01 13:35:19.910653]: GetCachedToolUsageStats called [1970-Apr-01 13:35:28.447557]: GetCachedToolUsageStats called [1970-Apr-01 13:46:00.756021]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Apr-02 00:46:01.452365]: GetCachedToolUsageStats called [1970-Apr-02 00:46:04.348533]: GetCachedToolUsageStats called [1970-Apr-02 02:49:09.378460]: GetCachedToolUsageStats called [1970-Apr-02 02:49:12.657982]: GetCachedToolUsageStats called [1970-Apr-02 05:40:36.529366]: GetCachedToolUsageStats called [1970-Apr-02 05:42:00.255056]: GetCachedToolUsageStats called [1970-Apr-02 05:42:20.891983]: GetCachedToolUsageStats called [1970-Apr-02 05:50:45.985882]: GetCachedToolUsageStats called [1970-Apr-02 05:51:07.937528]: GetCachedToolUsageStats called [1970-Apr-02 05:51:12.576016]: GetCachedToolUsageStats called [1970-Apr-02 05:51:51.990488]: GetCachedToolUsageStats called [1970-Apr-02 06:00:05.585391]: GetCachedToolUsageStats called [1970-Apr-02 06:00:39.079297]: GetCachedToolUsageStats called [1970-Apr-02 06:00:50.321892]: GetCachedToolUsageStats called [1970-Apr-02 06:01:29.527763]: GetCachedToolUsageStats called [1970-Apr-02 06:08:01.915004]: GetCachedToolUsageStats called [1970-Apr-02 06:08:24.302991]: GetCachedToolUsageStats called [1970-Apr-02 06:08:40.511276]: GetCachedToolUsageStats called [1970-Apr-02 06:15:12.060911]: GetCachedToolUsageStats called [1970-Apr-02 06:15:34.254683]: GetCachedToolUsageStats called [1970-Apr-02 06:16:40.809623]: GetCachedToolUsageStats called [1970-Apr-02 06:20:41.885351]: GetCachedToolUsageStats called [1970-Apr-02 06:20:45.367400]: GetCachedToolUsageStats called [1970-Apr-02 07:18:14.348334]: GetCachedToolUsageStats called [1970-Apr-02 07:18:17.075575]: GetCachedToolUsageStats called [1970-Apr-05 07:14:31.558992]: GetCachedToolUsageStats called [1970-Apr-05 07:14:34.908846]: GetCachedToolUsageStats called [1970-Apr-06 00:22:30.955151]: GetCachedToolUsageStats called [1970-Apr-06 00:22:34.441571]: GetCachedToolUsageStats called [1970-Apr-09 01:58:42.747452]: GetCachedToolUsageStats called [1970-Apr-09 01:58:45.580912]: GetCachedToolUsageStats called [1970-Apr-09 02:01:24.772971]: GetCachedToolUsageStats called [1970-Apr-09 02:03:00.176922]: GetCachedToolUsageStats called [1970-Apr-09 02:03:03.561656]: GetCachedToolUsageStats called [1970-Apr-09 03:00:41.460848]: GetCachedToolUsageStats called [1970-Apr-09 03:01:26.327143]: GetCachedToolUsageStats called [1970-Apr-10 02:12:40.003378]: GetCachedToolUsageStats called [1970-Apr-10 02:12:43.248002]: GetCachedToolUsageStats called [1970-Apr-12 20:37:08.653350]: Expected packet id: 0x68, Got packet id: 0x11, Full packet: 0xf3,0x1,0x0,0x24,0x0,0x17,0x0,0x0,0x0,0x0,0x16,0x0,0x0,0x0,0xaa,0x2,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x11,0xfc,0x8,0xf2,0x7f, [1970-Apr-12 20:37:08.655396]: Toolhead 1 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Apr-13 05:18:34.551145]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Apr-15 03:59:20.648750]: GetCachedToolUsageStats called [1970-Apr-15 04:34:35.211672]: GetCachedToolUsageStats called [1970-Apr-15 16:21:49.538596]: GetCachedToolUsageStats called [1970-Apr-15 16:21:52.455644]: GetCachedToolUsageStats called [1970-Apr-15 21:25:17.976302]: GetCachedToolUsageStats called [1970-Apr-15 21:27:02.081341]: GetCachedToolUsageStats called [1970-Apr-15 21:59:20.328707]: GetCachedToolUsageStats called [1970-Apr-16 03:50:12.710283]: GetCachedToolUsageStats called [1970-Apr-16 14:04:57.068471]: GetCachedToolUsageStats called [1970-Apr-16 14:05:26.064371]: GetCachedToolUsageStats called [1970-Apr-16 14:06:19.941611]: GetCachedToolUsageStats called [1970-Apr-16 14:49:52.327751]: GetCachedToolUsageStats called [1970-Apr-16 14:49:55.986924]: GetCachedToolUsageStats called [1970-Apr-20 01:35:54.582693]: GetCachedToolUsageStats called [1970-Apr-20 01:35:57.826365]: GetCachedToolUsageStats called [1970-Apr-22 11:58:19.380757]: Expected packet id: 0xc3, Got packet id: 0x11, Full packet: 0xf3,0x1,0x0,0x24,0x0,0x15,0x0,0x0,0x0,0x0,0x16,0x0,0x0,0x0,0xaa,0x2,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x11,0x11,0x9e,0x21,0x96, [1970-Apr-22 11:58:19.382681]: Toolhead 1 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Apr-23 02:00:49.641284]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Apr-27 06:02:24.931694]: Expected packet id: 0xd9, Got packet id: 0x11, Full packet: 0xf3,0x1,0x0,0x24,0x0,0x17,0x0,0x0,0x0,0x0,0x16,0x0,0x0,0x0,0xaa,0x2,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x11,0xfc,0x8,0xf2,0x7f, [1970-Apr-27 06:02:24.933653]: Toolhead 1 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Apr-27 14:08:01.547344]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Apr-29 01:24:45.725166]: GetCachedToolUsageStats called [1970-Apr-29 07:28:20.962911]: GetCachedToolUsageStats called [1970-Apr-29 07:28:36.678226]: GetCachedToolUsageStats called [1970-Apr-29 07:29:51.681872]: GetCachedToolUsageStats called [1970-Apr-29 08:40:39.287460]: GetCachedToolUsageStats called [1970-Apr-29 10:16:07.742232]: GetCachedToolUsageStats called [1970-Apr-29 10:16:30.508571]: GetCachedToolUsageStats called [1970-Apr-29 10:18:57.454542]: GetCachedToolUsageStats called [1970-Apr-29 10:19:12.624316]: GetCachedToolUsageStats called [1970-Apr-29 10:19:46.915329]: GetCachedToolUsageStats called [1970-Apr-29 10:20:05.098084]: GetCachedToolUsageStats called [1970-Apr-29 10:22:05.349722]: GetCachedToolUsageStats called [1970-Apr-29 10:33:35.155856]: GetCachedToolUsageStats called [1970-Apr-29 10:33:52.726899]: GetCachedToolUsageStats called [1970-Apr-29 10:34:36.548076]: GetCachedToolUsageStats called [1970-Apr-30 01:09:20.592486]: GetCachedToolUsageStats called [1970-Apr-30 01:13:51.722992]: GetCachedToolUsageStats called [1970-Apr-30 01:14:11.359358]: GetCachedToolUsageStats called [1970-Apr-30 01:15:14.609282]: GetCachedToolUsageStats called [1970-Apr-30 01:15:32.337683]: GetCachedToolUsageStats called [1970-Apr-30 01:16:23.161970]: GetCachedToolUsageStats called [1970-Apr-30 01:18:30.051789]: GetCachedToolUsageStats called [1970-Apr-30 01:18:51.993887]: GetCachedToolUsageStats called [1970-Apr-30 01:19:21.499657]: GetCachedToolUsageStats called [1970-Apr-30 01:24:13.809234]: GetCachedToolUsageStats called [1970-Apr-30 01:24:36.476305]: GetCachedToolUsageStats called [1970-Apr-30 01:24:55.990526]: GetCachedToolUsageStats called [1970-Apr-30 01:25:12.484601]: GetCachedToolUsageStats called [1970-Apr-30 01:28:02.190847]: GetCachedToolUsageStats called [1970-Apr-30 01:29:21.809045]: GetCachedToolUsageStats called [1970-Apr-30 01:30:02.512134]: GetCachedToolUsageStats called [1970-Apr-30 01:32:41.629938]: GetCachedToolUsageStats called [1970-Apr-30 01:33:00.755223]: GetCachedToolUsageStats called [1970-Apr-30 01:37:37.020462]: GetCachedToolUsageStats called [1970-Apr-30 01:38:14.195940]: GetCachedToolUsageStats called [1970-Apr-30 01:42:19.816222]: GetCachedToolUsageStats called [1970-Apr-30 01:42:51.419404]: GetCachedToolUsageStats called [1970-Apr-30 01:46:45.171687]: GetCachedToolUsageStats called [1970-Apr-30 01:48:05.085933]: GetCachedToolUsageStats called [1970-Apr-30 01:48:25.860416]: GetCachedToolUsageStats called [1970-Apr-30 01:51:35.695477]: GetCachedToolUsageStats called [1970-Apr-30 01:51:55.739653]: GetCachedToolUsageStats called [1970-Apr-30 08:03:13.453554]: GetCachedToolUsageStats called [1970-Apr-30 08:03:16.955698]: GetCachedToolUsageStats called [1970-Apr-30 08:55:32.347193]: GetCachedToolUsageStats called [1970-Apr-30 08:55:35.621149]: GetCachedToolUsageStats called [1970-Apr-30 09:07:18.508280]: GetCachedToolUsageStats called [1970-Apr-30 11:34:11.424215]: GetCachedToolUsageStats called [1970-Apr-30 14:11:49.199838]: GetCachedToolUsageStats called [1970-Apr-30 18:53:57.163976]: GetCachedToolUsageStats called [1970-Apr-30 18:54:00.539631]: GetCachedToolUsageStats called [1970-May-01 01:01:17.404322]: GetCachedToolUsageStats called [1970-May-02 11:01:54.493359]: GetCachedToolUsageStats called [1970-May-02 11:02:01.702301]: GetCachedToolUsageStats called [1970-May-02 11:02:17.271082]: GetCachedToolUsageStats called [1970-May-02 11:02:21.300749]: GetCachedToolUsageStats called [1970-May-02 13:15:36.036497]: GetCachedToolUsageStats called [1970-May-02 13:15:50.826352]: GetCachedToolUsageStats called [1970-May-02 13:16:57.983604]: GetCachedToolUsageStats called [1970-May-02 13:18:20.773861]: GetCachedToolUsageStats called [1970-May-02 13:18:42.938171]: GetCachedToolUsageStats called [1970-May-02 13:20:17.999718]: GetCachedToolUsageStats called [1970-May-02 13:22:29.218576]: GetCachedToolUsageStats called [1970-May-02 13:22:51.189117]: GetCachedToolUsageStats called [1970-May-02 13:23:15.401806]: GetCachedToolUsageStats called [1970-May-02 13:24:46.807636]: GetCachedToolUsageStats called [1970-May-02 13:25:06.519845]: GetCachedToolUsageStats called [1970-May-02 13:26:17.777434]: GetCachedToolUsageStats called [1970-May-02 13:26:37.830694]: GetCachedToolUsageStats called [1970-May-02 13:28:01.377567]: GetCachedToolUsageStats called [1970-May-02 13:31:18.786023]: GetCachedToolUsageStats called [1970-May-02 13:31:34.954180]: GetCachedToolUsageStats called [1970-May-02 13:32:25.778520]: GetCachedToolUsageStats called [1970-May-02 13:32:41.583893]: GetCachedToolUsageStats called [1970-May-02 13:33:48.739434]: GetCachedToolUsageStats called [1970-May-02 13:34:04.295155]: GetCachedToolUsageStats called [1970-May-02 13:34:40.288770]: GetCachedToolUsageStats called [1970-May-02 13:34:53.819426]: GetCachedToolUsageStats called [1970-May-02 13:35:26.126385]: GetCachedToolUsageStats called [1970-May-02 17:25:00.737971]: GetCachedToolUsageStats called [1970-May-03 09:37:31.225294]: GetCachedToolUsageStats called [1970-May-03 09:59:40.596032]: GetCachedToolUsageStats called [1970-May-03 09:59:44.190571]: GetCachedToolUsageStats called [1970-May-04 02:44:24.763089]: GetCachedToolUsageStats called [1970-May-04 02:44:28.458399]: GetCachedToolUsageStats called [1970-May-04 02:44:53.224803]: GetCachedToolUsageStats called [1970-May-04 15:23:21.576984]: GetCachedToolUsageStats called [1970-May-04 15:23:24.747802]: GetCachedToolUsageStats called [1970-May-06 01:06:11.066993]: GetCachedToolUsageStats called [1970-May-06 01:07:44.516394]: GetCachedToolUsageStats called [1970-May-06 01:18:15.631122]: GetCachedToolUsageStats called [1970-May-06 01:24:48.495203]: GetCachedToolUsageStats called [1970-May-06 01:24:53.976575]: GetCachedToolUsageStats called [1970-May-06 01:25:09.254890]: GetCachedToolUsageStats called [1970-May-06 01:25:12.931166]: GetCachedToolUsageStats called [1970-May-06 01:42:00.746715]: GetCachedToolUsageStats called [1970-May-06 02:46:35.029829]: GetCachedToolUsageStats called [1970-May-06 02:57:32.199802]: GetCachedToolUsageStats called [1970-May-06 02:57:35.127109]: GetCachedToolUsageStats called [1970-May-06 06:57:44.219296]: GetCachedToolUsageStats called [1970-May-06 06:57:46.595201]: GetCachedToolUsageStats called [1970-May-06 07:09:48.714343]: GetCachedToolUsageStats called [1970-May-06 13:04:17.371900]: GetCachedToolUsageStats called [1970-May-06 18:19:14.819318]: GetCachedToolUsageStats called [1970-May-06 18:20:46.497594]: GetCachedToolUsageStats called [1970-May-06 18:22:06.278822]: GetCachedToolUsageStats called [1970-May-06 18:22:25.359392]: GetCachedToolUsageStats called [1970-May-06 18:22:39.566061]: GetCachedToolUsageStats called [1970-May-06 18:25:00.084565]: GetCachedToolUsageStats called [1970-May-06 18:25:21.714276]: GetCachedToolUsageStats called [1970-May-06 18:25:45.402381]: GetCachedToolUsageStats called [1970-May-06 18:27:32.727628]: GetCachedToolUsageStats called [1970-May-06 18:30:03.917660]: GetCachedToolUsageStats called [1970-May-06 18:30:19.138309]: GetCachedToolUsageStats called [1970-May-06 18:30:19.454071]: GetCachedToolUsageStats called [1970-May-06 18:32:27.024158]: GetCachedToolUsageStats called [1970-May-06 18:32:44.404104]: GetCachedToolUsageStats called [1970-May-06 18:33:23.749877]: GetCachedToolUsageStats called [1970-May-06 18:34:39.535461]: GetCachedToolUsageStats called [1970-May-06 18:34:44.968691]: GetCachedToolUsageStats called [1970-May-06 18:34:50.992729]: GetCachedToolUsageStats called [1970-May-06 18:35:03.283827]: GetCachedToolUsageStats called [1970-May-06 18:35:04.802250]: GetCachedToolUsageStats called [1970-May-06 18:35:06.087372]: GetCachedToolUsageStats called [1970-May-07 00:29:00.256477]: GetCachedToolUsageStats called [1970-May-07 00:29:03.550747]: GetCachedToolUsageStats called [1970-May-07 00:30:35.677538]: GetCachedToolUsageStats called [1970-May-07 03:01:07.814491]: GetCachedToolUsageStats called [1970-May-07 03:01:11.020414]: GetCachedToolUsageStats called [1970-May-09 15:37:11.596672]: Toolhead 1: CRC error on Bronx [1970-May-09 15:37:12.181753]: Toolhead 1 : Toolhead Response Fail with comm_error: 1 Retry # : 1 [1970-May-10 04:46:30.870481]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-May-20 02:14:56.459362]: GetCachedToolUsageStats called [1970-May-20 02:14:59.505299]: GetCachedToolUsageStats called [1970-May-20 02:25:27.313325]: GetCachedToolUsageStats called [1970-May-20 02:25:30.532140]: GetCachedToolUsageStats called [1970-May-21 06:12:15.388988]: GetCachedToolUsageStats called [1970-May-21 06:12:19.322872]: GetCachedToolUsageStats called [1970-May-21 06:14:41.598122]: GetCachedToolUsageStats called [1970-May-21 06:14:45.269903]: GetCachedToolUsageStats called [1970-May-21 06:15:13.664823]: GetCachedToolUsageStats called [1970-May-21 06:15:15.922632]: GetCachedToolUsageStats called [1970-Jun-01 08:42:55.173001]: Expected packet id: 0xaf, Got packet id: 0x11, Full packet: 0xf3,0x1,0x0,0x24,0x0,0x18,0x0,0x0,0x0,0x0,0x18,0x0,0x0,0x0,0xaa,0x2,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x11,0x93,0x25,0x3b,0x7e, [1970-Jun-01 08:42:55.176006]: Toolhead 1 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jun-01 13:41:40.098274]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Jun-14 13:21:14.202369]: Toolhead 1: CRC error on Bronx [1970-Jun-14 13:21:14.766014]: Toolhead 1 : Toolhead Response Fail with comm_error: 1 Retry # : 1 [1970-Jun-15 00:19:37.344040]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Jun-29 07:29:50.262936]: Expected packet id: 0xae, Got packet id: 0x11, Full packet: 0xf3,0x1,0x0,0x24,0x0,0x18,0x0,0x0,0x0,0x0,0x17,0x0,0x0,0x0,0xaa,0x2,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x11,0x65,0x5a,0x9f,0x16, [1970-Jun-29 07:29:50.383285]: Toolhead 1 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jun-29 09:57:08.678429]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Jul-03 06:31:13.421151]: Expected packet id: 0xeb, Got packet id: 0x11, Full packet: 0xf3,0x1,0x0,0x24,0x0,0x18,0x0,0x0,0x0,0x0,0x18,0x0,0x0,0x0,0xaa,0x2,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x11,0x93,0x25,0x3b,0x7e, [1970-Jul-03 06:31:13.423083]: Toolhead 1 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jul-03 21:57:04.943939]: TH1: 2 failures in last 65536 packets (0.00305176%) [1970-Jul-17 05:38:11.222140]: sending moose chamber brightness 85 [1970-Jul-17 05:38:11.282127]: Heater manager Set Target Temperature to 215, index 0 [1970-Jul-17 05:38:11.283927]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:38:11.286103]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:38:11.287840]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:38:12.510650]: bronx lowest mem space: 0x34a bytes [1970-Jul-17 05:38:12.612669]: wait for heaters at target, wait bitmask 0x1 [1970-Jul-17 05:38:35.333155]: sending moose chamber brightness 85 [1970-Jul-17 05:41:27.515682]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:41:30.093487]: Raw HES proceeding [1970-Jul-17 05:41:30.109505]: Got raw val 22614, saturated: true [1970-Jul-17 05:41:30.133940]: Returning HES [1970-Jul-17 05:41:30.135663]: Sending back val 22614, saturated true [1970-Jul-17 05:41:30.238907]: Toolhead Abort [1970-Jul-17 05:41:30.245977]: aborting pru with shutdown=true [1970-Jul-17 05:41:30.260499]: Last sync period had (0,0,100076973) buffer fulls due to suspend moves [1970-Jul-17 05:41:30.278278]: Libstepper All Axis Abort [1970-Jul-17 05:42:44.264803]: Toolhead 0 state error: 80 [1970-Jul-17 05:44:18.572425]: Toolhead 0 state error: 56 [1970-Jul-17 05:44:20.592908]: Toolhead 0 state error: 80 [1970-Jul-17 05:44:37.105592]: Heater manager Set Target Temperature to 215, index 0 [1970-Jul-17 05:44:37.107383]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:44:37.109447]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:44:37.111479]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:44:38.344136]: wait for heaters at target, wait bitmask 0x1 [1970-Jul-17 05:45:24.507912]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:45:29.671597]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:45:34.820822]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:45:40.652195]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:45:46.094722]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:45:51.863843]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:45:57.383542]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:46:03.031574]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:46:08.498328]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:46:12.291780]: Raw HES proceeding [1970-Jul-17 05:46:12.339184]: HES not updated! [1970-Jul-17 05:46:12.388779]: HES not updated! [1970-Jul-17 05:46:12.442450]: HES not updated! [1970-Jul-17 05:46:12.471960]: Got raw val 22787, saturated: true [1970-Jul-17 05:46:12.504487]: Returning HES [1970-Jul-17 05:46:12.506337]: Sending back val 22787, saturated true [1970-Jul-17 05:46:12.566192]: Toolhead Abort [1970-Jul-17 05:46:12.568015]: aborting pru with shutdown=true [1970-Jul-17 05:46:12.571886]: Last sync period had (0,0,100083948) buffer fulls due to suspend moves [1970-Jul-17 05:46:12.573685]: Libstepper All Axis Abort [1970-Jul-17 05:46:22.825100]: Toolhead 0 state error: 0 [1970-Jul-17 05:46:43.311852]: Heater manager Set Target Temperature to 215, index 0 [1970-Jul-17 05:46:43.313635]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:46:43.315689]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:46:43.317399]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:46:44.543383]: wait for heaters at target, wait bitmask 0x1 [1970-Jul-17 05:46:48.792706]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:46:53.217426]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:46:58.301099]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:47:03.134363]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:47:08.102163]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:47:13.025879]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:47:17.859783]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:47:22.815779]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:47:27.493763]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:47:32.406213]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:47:34.220282]: wait for axis 0 full: false offset: 90 l3map offset: 90 status: 1 position 0 status count 1001 [1970-Jul-17 05:47:37.686411]: Raw HES proceeding [1970-Jul-17 05:47:37.702157]: Got raw val 24300, saturated: true [1970-Jul-17 05:47:37.736878]: Returning HES [1970-Jul-17 05:47:37.738588]: Sending back val 24300, saturated true [1970-Jul-17 05:47:37.805658]: Toolhead Abort [1970-Jul-17 05:47:37.807465]: aborting pru with shutdown=true [1970-Jul-17 05:47:37.810906]: Last sync period had (0,0,100087542) buffer fulls due to suspend moves [1970-Jul-17 05:47:37.812711]: Libstepper All Axis Abort [1970-Jul-17 05:47:40.604085]: Toolhead 1 state error: 48 [1970-Jul-17 05:48:02.422157]: Toolhead 1 state error: 0 [1970-Jul-17 05:48:57.869377]: Heater manager Set Target Temperature to 0, index 0 [1970-Jul-17 05:48:57.873466]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:48:57.875399]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:48:57.877756]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:49:34.985804]: Heater manager Set Target Temperature to 180, index 0 [1970-Jul-17 05:49:34.987655]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:49:35.000878]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:49:35.002636]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:49:36.227750]: HOME: axis 1, speed 11, flip dir true, sp false, blocking false [1970-Jul-17 05:49:36.230247]: Load Sense Limit Method: 1 [1970-Jul-17 05:49:36.233016]: Last sync period had (0,0,100088322) buffer fulls due to suspend moves [1970-Jul-17 05:49:36.234838]: Libstepper All Axis Abort [1970-Jul-17 05:49:39.005359]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:49:45.753852]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:49:52.171542]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:49:58.459112]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:03.534190]: HOME: 1 homing: Limit Detected!: [1970-Jul-17 05:50:03.536664]: Toolhead Abort [1970-Jul-17 05:50:03.538517]: aborting pru with shutdown=true [1970-Jul-17 05:50:03.546009]: Last sync period had (0,0,100089684) buffer fulls due to suspend moves [1970-Jul-17 05:50:03.547814]: Libstepper All Axis Abort [1970-Jul-17 05:50:03.618723]: HOME: 1 homing: Limit Detected!: [1970-Jul-17 05:50:05.526877]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:06.021754]: HOME: axis 0, speed 11, flip dir false, sp true, blocking false [1970-Jul-17 05:50:06.023774]: Load Sense Limit Method: 0 [1970-Jul-17 05:50:06.026486]: Last sync period had (0,0,100089810) buffer fulls due to suspend moves [1970-Jul-17 05:50:06.028986]: Libstepper All Axis Abort [1970-Jul-17 05:50:11.956190]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:18.424819]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:24.618251]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:30.999181]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:33.656839]: HOME: 0 homing: Limit Detected!: [1970-Jul-17 05:50:33.658656]: Toolhead Abort [1970-Jul-17 05:50:33.660640]: aborting pru with shutdown=true [1970-Jul-17 05:50:33.663785]: Last sync period had (0,0,100091247) buffer fulls due to suspend moves [1970-Jul-17 05:50:33.665567]: Libstepper All Axis Abort [1970-Jul-17 05:50:33.777739]: HOME: 0 homing: Limit Detected!: [1970-Jul-17 05:50:37.463487]: HOME: axis 1, speed 11, flip dir false, sp true, blocking false [1970-Jul-17 05:50:37.465498]: Load Sense Limit Method: 1 [1970-Jul-17 05:50:37.468323]: CLEAR BUFFER FAIL! in libstepper::Abort() [1970-Jul-17 05:50:37.471103]: Last sync period had (0,0,100091448) buffer fulls due to suspend moves [1970-Jul-17 05:50:37.472873]: Libstepper All Axis Abort [1970-Jul-17 05:50:38.054387]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:44.236282]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:50.672616]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:50:51.774280]: HOME: 1 homing: Limit Detected!: [1970-Jul-17 05:50:51.776712]: Toolhead Abort [1970-Jul-17 05:50:51.778743]: aborting pru with shutdown=true [1970-Jul-17 05:50:51.782080]: Last sync period had (0,0,100092189) buffer fulls due to suspend moves [1970-Jul-17 05:50:51.783878]: Libstepper All Axis Abort [1970-Jul-17 05:50:51.867916]: HOME: 1 homing: Limit Detected!: [1970-Jul-17 05:50:52.422459]: wait for heaters at target, wait bitmask 0x1 [1970-Jul-17 05:50:58.516397]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:51:06.898107]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:51:11.688723]: HOME: axis 2, speed 15, flip dir false, sp true, blocking false [1970-Jul-17 05:51:16.852216]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:51:22.998801]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:51:28.993040]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:51:35.265849]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:51:41.424354]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:51:42.269761]: HOME: 2 homing: Limit Detected!: [1970-Jul-17 05:51:42.271836]: Toolhead Abort [1970-Jul-17 05:51:42.273853]: aborting pru with shutdown=false [1970-Jul-17 05:51:42.276552]: Last sync period had (0,0,100095066) buffer fulls due to suspend moves [1970-Jul-17 05:51:42.278372]: Libstepper All Axis Abort [1970-Jul-17 05:51:42.391652]: HOME: 2 homing: Limit Detected!: [1970-Jul-17 05:51:42.578837]: HES logged: true [1970-Jul-17 05:51:52.437534]: GAP: Query->Await [1970-Jul-17 05:51:52.458770]: TH0: Retreived step position 11600143 [1970-Jul-17 05:51:52.493091]: wait for PRU status in get position [1970-Jul-17 05:51:52.494774]: wait for PRU status in get position [1970-Jul-17 05:51:52.502528]: GAP: Await->Done(Query) [1970-Jul-17 05:51:52.562592]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7) [1970-Jul-17 05:51:52.666601]: Syncing turned true [1970-Jul-17 05:51:52.694635]: PRU Event: PRU_SYNC_ON(12) [1970-Jul-17 05:51:52.696372]: PRU Event: PRU_SYNC_DELAY(11) [1970-Jul-17 05:51:52.754059]: Toolhead 0 ADC Error: 1 [1970-Jul-17 05:51:52.876235]: PRU Event: PRU_SYNC_DELAY(10) [1970-Jul-17 05:51:52.877927]: PRU Event: PRU_SYNC_DELAY(9) [1970-Jul-17 05:51:52.880440]: PRU Event: PRU_SYNC_DELAY(8) [1970-Jul-17 05:51:52.882206]: PRU Event: PRU_SYNC_DELAY(7) [1970-Jul-17 05:51:52.883903]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jul-17 05:51:52.885590]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jul-17 05:51:52.887427]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jul-17 05:51:52.889123]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jul-17 05:51:52.905813]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jul-17 05:51:52.907673]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jul-17 05:51:52.909381]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jul-17 05:51:52.952836]: Toolhead 0 commands idle [1970-Jul-17 05:51:55.824571]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:52:00.023845]: Buffer stall ongoing: 11739 [1970-Jul-17 05:52:00.243411]: Buffer stall ongoing: 58179 [1970-Jul-17 05:52:00.287135]: Last sync period had (0,0,399) buffer fulls due to suspend moves [1970-Jul-17 05:52:00.288949]: Syncing turned false [1970-Jul-17 05:52:00.306293]: PRU Event: PRU_SYNC_OFF(0) [1970-Jul-17 05:52:00.308036]: Buffer stall ongoing: 67725 [1970-Jul-17 05:52:00.365168]: Toolhead 0 ADC Error: 0 [1970-Jul-17 05:52:01.393254]: HES logged: true [1970-Jul-17 05:52:02.409696]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:52:04.686341]: GAP: Query->Await [1970-Jul-17 05:52:04.703364]: TH0: Retreived step position 11469071 [1970-Jul-17 05:52:04.750429]: wait for PRU status in get position [1970-Jul-17 05:52:04.752713]: wait for PRU status in get position [1970-Jul-17 05:52:04.754359]: GAP: Await->Done(Query) [1970-Jul-17 05:52:08.022922]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:52:13.140598]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:52:14.984328]: Changing HES sample rate. Commanded: 215Hz; clamped to 215Hz (215/1) [1970-Jul-17 05:52:16.027769]: Expecting 104391 steps extruded this print from 961.685 mm of plastic [1970-Jul-17 05:52:16.357509]: Heater manager Set Target Temperature to 215, index 0 [1970-Jul-17 05:52:16.359299]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:52:16.363781]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:52:16.365521]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:52:16.669516]: wait for heaters at target, wait bitmask 0x3 [1970-Jul-17 05:53:17.198989]: Expend Buffer: false [1970-Jul-17 05:53:17.314044]: Syncing turned true [1970-Jul-17 05:53:17.333974]: PRU Event: PRU_SYNC_ON(12) [1970-Jul-17 05:53:17.335647]: PRU Event: PRU_SYNC_DELAY(11) [1970-Jul-17 05:53:18.160560]: Toolhead 0 ADC Error: 1 [1970-Jul-17 05:53:18.443582]: PRU Event: PRU_SYNC_DELAY(10) [1970-Jul-17 05:53:18.445331]: PRU Event: PRU_SYNC_DELAY(9) [1970-Jul-17 05:53:18.447174]: PRU Event: PRU_SYNC_DELAY(8) [1970-Jul-17 05:53:18.470387]: PRU Event: PRU_SYNC_DELAY(7) [1970-Jul-17 05:53:18.472301]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jul-17 05:53:18.474080]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jul-17 05:53:18.475792]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jul-17 05:53:18.477591]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jul-17 05:53:18.479298]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jul-17 05:53:18.488203]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jul-17 05:53:18.489935]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jul-17 05:53:21.723569]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:53:22.476134]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:53:22.959386]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:53:23.530935]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:53:24.030813]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:53:24.589711]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:53:24.849841]: Toolhead 0 state error: 81 [1970-Jul-17 05:53:26.440943]: toolhead pausing [1970-Jul-17 05:53:26.442729]: Toolhead 0 : Retry: Waited 1.59042s from state change [1970-Jul-17 05:53:26.447638]: Last sync period had (0,222,4605) buffer fulls due to suspend moves [1970-Jul-17 05:53:26.449383]: Syncing turned false [1970-Jul-17 05:53:26.451691]: quack pause: true [1970-Jul-17 05:53:26.502000]: PRU Event: PRU_SYNC_OFF(0) [1970-Jul-17 05:53:26.539097]: axis running: 0 [1970-Jul-17 05:53:26.660644]: axis running: 0 [1970-Jul-17 05:53:26.795878]: Last sync period had (0,222,4659) buffer fulls due to suspend moves [1970-Jul-17 05:53:26.799656]: Libstepper All Axis Abort [1970-Jul-17 05:53:26.801625]: Clear Toolhead Buffer [1970-Jul-17 05:53:26.822205]: clear toolhead buffer acknowledged [1970-Jul-17 05:53:26.897227]: toolhead unpausing [1970-Jul-17 05:53:26.899518]: quack pause: false [1970-Jul-17 05:53:26.989830]: Expend Buffer: true [1970-Jul-17 05:53:27.041052]: Last sync period had (0,222,4674) buffer fulls due to suspend moves [1970-Jul-17 05:53:27.042888]: Syncing turned false [1970-Jul-17 05:53:27.112813]: Toolhead 0 state error: 0 [1970-Jul-17 05:53:27.114595]: Toolhead 0 ADC Error: 0 [1970-Jul-17 05:53:27.155474]: GAP: Query->Await [1970-Jul-17 05:53:27.221846]: TH0: Retreived step position 14090511 [1970-Jul-17 05:53:27.427589]: wait for PRU status in get position [1970-Jul-17 05:53:27.429293]: wait for PRU status in get position [1970-Jul-17 05:53:27.431200]: GAP: Await->Done(Query) [1970-Jul-17 05:53:27.573852]: Suspend [1970-Jul-17 05:53:27.579871]: Suspend index 15 found, A-pos 11.7739 [1970-Jul-17 05:53:30.447704]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:53:35.542672]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:53:43.387078]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:53:47.834060]: GAP: Query->Await [1970-Jul-17 05:53:47.850881]: TH0: Retreived step position 14287119 [1970-Jul-17 05:53:47.892589]: wait for PRU status in get position [1970-Jul-17 05:53:47.894337]: wait for PRU status in get position [1970-Jul-17 05:53:47.901897]: GAP: Await->Done(Query) [1970-Jul-17 05:53:48.714133]: Heater manager Set Target Temperature to 215, index 0 [1970-Jul-17 05:53:48.715940]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:53:48.717797]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:53:48.719652]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:53:49.206020]: wait for heaters at target, wait bitmask 0x3 [1970-Jul-17 05:53:53.414008]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:53:53.839880]: Expend Buffer: false [1970-Jul-17 05:53:53.915747]: Syncing turned true [1970-Jul-17 05:53:53.979200]: PRU Event: PRU_SYNC_ON(12) [1970-Jul-17 05:53:53.981113]: PRU Event: PRU_SYNC_DELAY(11) [1970-Jul-17 05:53:54.519105]: Toolhead 0 ADC Error: 1 [1970-Jul-17 05:53:55.370803]: PRU Event: PRU_SYNC_DELAY(10) [1970-Jul-17 05:53:55.372519]: PRU Event: PRU_SYNC_DELAY(9) [1970-Jul-17 05:53:55.374499]: PRU Event: PRU_SYNC_DELAY(8) [1970-Jul-17 05:53:55.378019]: PRU Event: PRU_SYNC_DELAY(7) [1970-Jul-17 05:53:55.380547]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jul-17 05:53:55.382256]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jul-17 05:53:55.383952]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jul-17 05:53:55.385806]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jul-17 05:53:55.387527]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jul-17 05:53:55.389233]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jul-17 05:53:55.391945]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jul-17 05:53:56.185435]: Expected packet id: 0x4c, Got packet id: 0x4b, Full packet: 0xf3,0x0,0x0,0x2d,0x0,0xd9,0x0,0xf,0xe8,0x32,0x1,0x0,0xd7,0x0,0x1,0xbd,0xb6,0x3,0x4a,0x1,0x0,0x0,0x0,0x4,0x3d,0xe3,0x0,0x4b,0x40,0xf5,0x21,0xa, [1970-Jul-17 05:53:56.187350]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jul-17 05:53:56.374595]: Expected packet id: 0x6b, Got packet id: 0xd7, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xda,0x0,0xf,0xe8,0x32,0x1,0x0,0xd7,0x0,0x1,0xbd,0xb6, [1970-Jul-17 05:53:56.377246]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jul-17 05:53:59.197068]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:01.767348]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:04.614987]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:07.611532]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:10.470706]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:12.187707]: Expend Buffer: false [1970-Jul-17 05:54:12.597404]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:13.009270]: Toolhead 0 state error: 81 [1970-Jul-17 05:54:13.242789]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:14.911803]: Toolhead 0 : Retry: Waited 1.59889s from state change [1970-Jul-17 05:54:15.024393]: toolhead pausing [1970-Jul-17 05:54:15.035430]: Last sync period had (0,204,4245) buffer fulls due to suspend moves [1970-Jul-17 05:54:15.037462]: Syncing turned false [1970-Jul-17 05:54:15.039573]: quack pause: true [1970-Jul-17 05:54:15.074349]: PRU Event: PRU_SYNC_OFF(0) [1970-Jul-17 05:54:15.177949]: axis running: 0 [1970-Jul-17 05:54:15.263219]: axis running: 0 [1970-Jul-17 05:54:15.318035]: axis running: 0 [1970-Jul-17 05:54:15.406281]: axis running: 0 [1970-Jul-17 05:54:15.467374]: axis running: 0 [1970-Jul-17 05:54:15.553176]: axis running: 0 [1970-Jul-17 05:54:15.631369]: axis running: 0 [1970-Jul-17 05:54:15.757874]: axis running: 0 [1970-Jul-17 05:54:15.835132]: axis running: 0 [1970-Jul-17 05:54:15.922455]: axis running: 0 [1970-Jul-17 05:54:15.974579]: axis running: 0 [1970-Jul-17 05:54:16.062062]: axis running: 0 [1970-Jul-17 05:54:16.133256]: axis running: 0 [1970-Jul-17 05:54:16.217965]: axis running: 0 [1970-Jul-17 05:54:16.546237]: axis running: 0 [1970-Jul-17 05:54:16.619286]: axis running: 0 [1970-Jul-17 05:54:16.717197]: axis running: 0 [1970-Jul-17 05:54:16.793070]: axis running: 0 [1970-Jul-17 05:54:16.869055]: axis running: 0 [1970-Jul-17 05:54:16.997667]: axis running: 0 [1970-Jul-17 05:54:17.015624]: Toolhead 0 state error: 0 [1970-Jul-17 05:54:17.148779]: Last sync period had (0,204,4272) buffer fulls due to suspend moves [1970-Jul-17 05:54:17.152989]: Libstepper All Axis Abort [1970-Jul-17 05:54:17.154728]: Clear Toolhead Buffer [1970-Jul-17 05:54:17.178086]: clear toolhead buffer acknowledged [1970-Jul-17 05:54:17.280415]: toolhead unpausing [1970-Jul-17 05:54:17.282114]: quack pause: false [1970-Jul-17 05:54:17.422485]: Expend Buffer: true [1970-Jul-17 05:54:17.546622]: Last sync period had (0,204,4290) buffer fulls due to suspend moves [1970-Jul-17 05:54:17.548463]: Syncing turned false [1970-Jul-17 05:54:17.652155]: Toolhead 0 ADC Error: 0 [1970-Jul-17 05:54:17.681657]: GAP: Query->Await [1970-Jul-17 05:54:17.696903]: TH0: Retreived step position 13893903 [1970-Jul-17 05:54:17.744150]: wait for PRU status in get position [1970-Jul-17 05:54:17.745847]: wait for PRU status in get position [1970-Jul-17 05:54:17.748131]: GAP: Await->Done(Query) [1970-Jul-17 05:54:17.872669]: Suspend [1970-Jul-17 05:54:17.875117]: Suspend index 16 found, A-pos 17.0548 [1970-Jul-17 05:54:23.668259]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:54:29.101761]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:54:36.458016]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:54:38.391004]: GAP: Query->Await [1970-Jul-17 05:54:38.421896]: TH0: Retreived step position 14156047 [1970-Jul-17 05:54:38.453649]: wait for PRU status in get position [1970-Jul-17 05:54:38.460715]: wait for PRU status in get position [1970-Jul-17 05:54:38.462649]: GAP: Await->Done(Query) [1970-Jul-17 05:54:39.359413]: Heater manager Set Target Temperature to 215, index 0 [1970-Jul-17 05:54:39.374080]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:54:39.376200]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:54:39.379175]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:54:39.810826]: wait for heaters at target, wait bitmask 0x3 [1970-Jul-17 05:54:44.431848]: Expend Buffer: false [1970-Jul-17 05:54:44.505279]: Syncing turned true [1970-Jul-17 05:54:44.539430]: PRU Event: PRU_SYNC_ON(12) [1970-Jul-17 05:54:44.541403]: PRU Event: PRU_SYNC_DELAY(11) [1970-Jul-17 05:54:45.043272]: Toolhead 0 ADC Error: 1 [1970-Jul-17 05:54:45.996699]: PRU Event: PRU_SYNC_DELAY(10) [1970-Jul-17 05:54:45.998538]: PRU Event: PRU_SYNC_DELAY(9) [1970-Jul-17 05:54:46.010550]: PRU Event: PRU_SYNC_DELAY(8) [1970-Jul-17 05:54:46.012327]: PRU Event: PRU_SYNC_DELAY(7) [1970-Jul-17 05:54:46.014382]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jul-17 05:54:46.016208]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jul-17 05:54:46.017925]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jul-17 05:54:46.019616]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jul-17 05:54:46.024778]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jul-17 05:54:46.026544]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jul-17 05:54:46.028244]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jul-17 05:54:48.247624]: Expend Buffer: false [1970-Jul-17 05:54:49.093765]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:49.969387]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:50.859633]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:51.675258]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:52.418450]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:53.087887]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:53.885892]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:54.613503]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:55.295831]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:56.061507]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:56.827149]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:57.496273]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:58.256990]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:58.934678]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:54:59.521553]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:00.204592]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:01.050791]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:01.729679]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:02.734300]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:03.443218]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:03.604529]: Toolhead 0 state error: 81 [1970-Jul-17 05:55:05.294003]: toolhead pausing [1970-Jul-17 05:55:05.295756]: Toolhead 0 : Retry: Waited 1.61188s from state change [1970-Jul-17 05:55:05.300523]: Last sync period had (0,207,8277) buffer fulls due to suspend moves [1970-Jul-17 05:55:05.302386]: Syncing turned false [1970-Jul-17 05:55:05.304485]: quack pause: true [1970-Jul-17 05:55:05.350864]: PRU Event: PRU_SYNC_OFF(0) [1970-Jul-17 05:55:05.441352]: axis running: 0 [1970-Jul-17 05:55:05.494343]: axis running: 0 [1970-Jul-17 05:55:05.547583]: axis running: 0 [1970-Jul-17 05:55:05.599664]: axis running: 0 [1970-Jul-17 05:55:05.717053]: Last sync period had (0,207,8307) buffer fulls due to suspend moves [1970-Jul-17 05:55:05.732164]: Libstepper All Axis Abort [1970-Jul-17 05:55:05.734026]: Clear Toolhead Buffer [1970-Jul-17 05:55:05.748748]: clear toolhead buffer acknowledged [1970-Jul-17 05:55:05.824913]: toolhead unpausing [1970-Jul-17 05:55:05.826615]: quack pause: false [1970-Jul-17 05:55:05.960745]: Expend Buffer: true [1970-Jul-17 05:55:06.030923]: Last sync period had (0,207,8325) buffer fulls due to suspend moves [1970-Jul-17 05:55:06.032811]: Syncing turned false [1970-Jul-17 05:55:06.174420]: GAP: Query->Await [1970-Jul-17 05:55:06.190576]: Toolhead 0 state error: 0 [1970-Jul-17 05:55:06.192323]: TH0: Retreived step position 14024975 [1970-Jul-17 05:55:06.245699]: wait for PRU status in get position [1970-Jul-17 05:55:06.247365]: wait for PRU status in get position [1970-Jul-17 05:55:06.249003]: GAP: Await->Done(Query) [1970-Jul-17 05:55:06.369234]: Suspend [1970-Jul-17 05:55:06.372898]: Suspend index 17 found, A-pos 17.4588 [1970-Jul-17 05:55:08.819692]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:55:16.899174]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:55:24.265452]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:55:26.786315]: GAP: Query->Await [1970-Jul-17 05:55:26.812137]: TH0: Retreived step position 14024975 [1970-Jul-17 05:55:26.847067]: wait for PRU status in get position [1970-Jul-17 05:55:26.849026]: wait for PRU status in get position [1970-Jul-17 05:55:26.850918]: GAP: Await->Done(Query) [1970-Jul-17 05:55:27.573956]: Heater manager Set Target Temperature to 215, index 0 [1970-Jul-17 05:55:27.576762]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:55:27.578640]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 05:55:27.590886]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 05:55:28.079255]: wait for heaters at target, wait bitmask 0x3 [1970-Jul-17 05:55:32.835172]: Expend Buffer: false [1970-Jul-17 05:55:32.924838]: Syncing turned true [1970-Jul-17 05:55:32.948366]: PRU Event: PRU_SYNC_ON(12) [1970-Jul-17 05:55:32.950888]: PRU Event: PRU_SYNC_DELAY(11) [1970-Jul-17 05:55:32.952632]: PRU Event: PRU_SYNC_DELAY(10) [1970-Jul-17 05:55:32.954332]: PRU Event: PRU_SYNC_DELAY(9) [1970-Jul-17 05:55:32.961165]: PRU Event: PRU_SYNC_DELAY(8) [1970-Jul-17 05:55:32.962885]: PRU Event: PRU_SYNC_DELAY(7) [1970-Jul-17 05:55:32.964711]: PRU Event: PRU_SYNC_DELAY(6) [1970-Jul-17 05:55:32.966413]: PRU Event: PRU_SYNC_DELAY(5) [1970-Jul-17 05:55:34.214802]: Expected packet id: 0x65, Got packet id: 0x0, Full packet: 0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xd8,0x0,0xf,0xeb,0x24,0x1,0x0,0xd7,0x0,0x1,0xbd, [1970-Jul-17 05:55:34.217266]: Toolhead 0 : Toolhead Response Fail with comm_error: 117 Retry # : 1 [1970-Jul-17 05:55:34.512399]: PRU Event: PRU_SYNC_DELAY(4) [1970-Jul-17 05:55:34.514503]: PRU Event: PRU_SYNC_DELAY(3) [1970-Jul-17 05:55:34.517326]: PRU Event: PRU_SYNC_DELAY(2) [1970-Jul-17 05:55:34.519714]: PRU Event: PRU_SYNC_DELAY(1) [1970-Jul-17 05:55:34.530848]: PRU Event: PRU_SYNC_DELAY(0) [1970-Jul-17 05:55:38.914282]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:42.118907]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:45.367209]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:48.623016]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:51.419303]: Step Buffer Full libstepper: false toolhead: true [1970-Jul-17 05:55:52.061245]: Toolhead 0 state error: 81 [1970-Jul-17 05:55:53.697727]: toolhead pausing [1970-Jul-17 05:55:53.699476]: Toolhead 0 : Retry: Waited 1.59676s from state change [1970-Jul-17 05:55:53.704429]: Last sync period had (0,204,3660) buffer fulls due to suspend moves [1970-Jul-17 05:55:53.706190]: Syncing turned false [1970-Jul-17 05:55:53.707846]: quack pause: true [1970-Jul-17 05:55:53.741399]: PRU Event: PRU_SYNC_OFF(0) [1970-Jul-17 05:55:53.799812]: axis running: 0 [1970-Jul-17 05:55:54.001827]: axis running: 0 [1970-Jul-17 05:55:54.083395]: axis running: 0 [1970-Jul-17 05:55:54.174516]: axis running: 0 [1970-Jul-17 05:55:54.233686]: axis running: 0 [1970-Jul-17 05:55:54.312816]: axis running: 0 [1970-Jul-17 05:55:54.369369]: axis running: 0 [1970-Jul-17 05:55:54.506357]: axis running: 0 [1970-Jul-17 05:55:54.597872]: axis running: 0 [1970-Jul-17 05:55:54.673081]: axis running: 0 [1970-Jul-17 05:55:54.749474]: axis running: 0 [1970-Jul-17 05:55:54.807505]: axis running: 0 [1970-Jul-17 05:55:54.889260]: axis running: 0 [1970-Jul-17 05:55:54.945935]: axis running: 0 [1970-Jul-17 05:55:55.085556]: axis running: 0 [1970-Jul-17 05:55:55.166295]: axis running: 0 [1970-Jul-17 05:55:55.235384]: axis running: 0 [1970-Jul-17 05:55:55.303058]: axis running: 0 [1970-Jul-17 05:55:55.398678]: axis running: 0 [1970-Jul-17 05:55:55.473466]: axis running: 0 [1970-Jul-17 05:55:55.543269]: axis running: 0 [1970-Jul-17 05:55:55.682080]: axis running: 0 [1970-Jul-17 05:55:55.749026]: axis running: 0 [1970-Jul-17 05:55:55.821948]: axis running: 0 [1970-Jul-17 05:55:55.887759]: axis running: 0 [1970-Jul-17 05:55:55.953231]: axis running: 0 [1970-Jul-17 05:55:56.009118]: axis running: 0 [1970-Jul-17 05:55:56.052795]: Toolhead 0 state error: 0 [1970-Jul-17 05:55:56.189583]: Last sync period had (0,204,3690) buffer fulls due to suspend moves [1970-Jul-17 05:55:56.193847]: Libstepper All Axis Abort [1970-Jul-17 05:55:56.199619]: Clear Toolhead Buffer [1970-Jul-17 05:55:56.218217]: clear toolhead buffer acknowledged [1970-Jul-17 05:55:56.381938]: toolhead unpausing [1970-Jul-17 05:55:56.383666]: quack pause: false [1970-Jul-17 05:55:56.500674]: Expend Buffer: true [1970-Jul-17 05:55:56.574540]: Last sync period had (0,204,3708) buffer fulls due to suspend moves [1970-Jul-17 05:55:56.576645]: Syncing turned false [1970-Jul-17 05:55:56.673674]: Toolhead 0 ADC Error: 0 [1970-Jul-17 05:55:56.726996]: GAP: Query->Await [1970-Jul-17 05:55:56.746350]: TH0: Retreived step position 14090511 [1970-Jul-17 05:55:56.778055]: wait for PRU status in get position [1970-Jul-17 05:55:56.790820]: wait for PRU status in get position [1970-Jul-17 05:55:56.792508]: GAP: Await->Done(Query) [1970-Jul-17 05:55:57.009201]: Suspend [1970-Jul-17 05:55:57.012464]: Suspend index 18 found, A-pos 22.7398 [1970-Jul-17 05:55:57.736338]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:56:04.803124]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:56:10.403326]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true [1970-Jul-17 05:56:16.170778]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 05:56:17.700843]: GAP: Query->Await [1970-Jul-17 05:56:17.721220]: TH0: Retreived step position 14024975 [1970-Jul-17 05:56:17.749992]: wait for PRU status in get position [1970-Jul-17 05:56:17.752927]: wait for PRU status in get position [1970-Jul-17 05:56:17.754943]: GAP: Await->Done(Query) [1970-Jul-17 05:58:54.712649]: Toolhead 0 state error: 56 [1970-Jul-17 05:58:56.215872]: Toolhead 0 state error: 0 [1970-Jul-17 06:03:43.903709]: toolhead pausing [1970-Jul-17 06:03:43.914061]: Last sync period had (0,204,10140) buffer fulls due to suspend moves [1970-Jul-17 06:03:43.915816]: Syncing turned false [1970-Jul-17 06:03:43.917493]: quack pause: true [1970-Jul-17 06:03:44.160813]: Last sync period had (0,204,10149) buffer fulls due to suspend moves [1970-Jul-17 06:03:44.162767]: Libstepper All Axis Abort [1970-Jul-17 06:03:44.164517]: Clear Toolhead Buffer [1970-Jul-17 06:03:44.202721]: clear toolhead buffer acknowledged [1970-Jul-17 06:03:44.297919]: toolhead unpausing [1970-Jul-17 06:03:44.299633]: quack pause: false [1970-Jul-17 06:03:44.438179]: Expend Buffer: true [1970-Jul-17 06:03:44.497939]: Last sync period had (0,204,10164) buffer fulls due to suspend moves [1970-Jul-17 06:03:44.499771]: Syncing turned false [1970-Jul-17 06:03:44.722146]: GAP: Query->Await [1970-Jul-17 06:03:44.753871]: TH0: Retreived step position 5177615 [1970-Jul-17 06:03:44.784842]: wait for PRU status in get position [1970-Jul-17 06:03:44.787003]: GAP: Await->Done(Query) [1970-Jul-17 06:03:45.004800]: Heater manager Set Target Temperature to 0, index 0 [1970-Jul-17 06:03:45.006635]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 06:03:45.008701]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 06:03:45.020785]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 06:03:50.421544]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 06:03:57.858736]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true [1970-Jul-17 06:04:00.291406]: Last sync period had (0,204,10878) buffer fulls due to suspend moves [1970-Jul-17 06:04:00.293246]: Syncing turned false [1970-Jul-17 06:04:00.295017]: TH0: 63 failures in last 6232 packets (1.01091%) [1970-Jul-17 06:04:00.297091]: Toolhead Abort [1970-Jul-17 06:04:00.298828]: aborting pru with shutdown=true [1970-Jul-17 06:04:00.313430]: Last sync period had (0,204,10878) buffer fulls due to suspend moves [1970-Jul-17 06:04:00.315351]: Libstepper All Axis Abort [1970-Jul-17 06:04:00.317011]: Heater manager Set Target Temperature to 0, index 0 [1970-Jul-17 06:04:00.318740]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 06:04:00.327763]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 06:04:00.329649]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 06:04:00.551348]: Heater manager Set Target Temperature to 0, index 0 [1970-Jul-17 06:04:00.553260]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 06:04:00.555430]: Heater manager Set Target Temperature to 0, index 1 [1970-Jul-17 06:04:00.557215]: Sent heater settings hold timeout 120min, rise timeout 20min, rise threshold 40C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized) [1970-Jul-17 06:04:00.697419]: Commanding stats update: Retract count: 3759621715 [1970-Jul-17 06:04:00.699290]: Toolhead 0 marked as possibly blocking! [1970-Jul-17 06:04:01.276204]: Toolhead 0 done blocking! [1970-Jul-17 06:04:01.446659]: GetToolUsageStats called in machine state 0 [1970-Jul-17 06:04:01.448404]: Commanding tool usage stat retrieve [1970-Jul-17 06:04:01.461081]: GetToolUsageState: Proceeds to 1 [1970-Jul-17 06:04:01.462797]: GetToolUsagState: Error from retrieve: 0x10a [1970-Jul-17 06:04:01.514267]: Raw usage stats: retract 3224276125ct, extrusion 192213065 steps, 1024784 seconds, refurbed 0 times [1970-Jul-17 06:04:01.559225]: GetToolUsageStats called in machine state 1 [1970-Jul-17 06:04:01.571333]: VerifyToolUsageStatsRetrieved: Done [1970-Jul-17 06:04:01.572987]: GetToolUsageState: Proceeds to 2 [1970-Jul-17 06:04:01.687342]: GetToolUsageStats called in machine state 2 [1970-Jul-17 06:04:01.689181]: GetToolUsageState: Done, resets [1970-Jul-17 06:06:53.123858]: sending moose chamber brightness 255 [1970-Jul-17 06:06:54.624410]: sending moose chamber brightness 85 [1970-Jul-17 06:06:56.678437]: sending moose chamber brightness 255